Download Resetter Canon IP 2770 / 2700

Reset Canon IP 2770 / 2700 Error 5B00
First Download Canon iP2770 Restter v1074 via the following link:

Download Resetter Canon IP 2770 / 2700

Next we have to make the Canon IP 2700 Printer Service Mode in state how:

1. The printer is turned off and plugged the power cord.
2. Press the RESUME button two seconds
3. Then press the POWER button until the green light flash (when pressing the POWER button, Resume button ... not released yet)
4. Then release the RESUME button, but do not release the button POWER.
5. POWER button while still depressed, press the Resume button 5 times. Led will flash alternately orange green with orange flames last. (do not be mistaken because the printer would die 4 times total, but temporary, too) Then ...
6. Release both buttons simultaneously.
7. Led will blink briefly then will glow GREEN.
8. The computer will detect the new device, ignore it .....
9. This situation is shown in a state iP2770 printer SERVICE MODE and ready to be reset.

After Printer Canon IP 2700/2770 have been in the Service Mode then we proceed with using software resetter caon IP 2770 has been downloaded previously, as follows:

1. Exctract File Resetter iP2770.
2. Prepare a paper in the printer (to print at the time of the reset).
3. Run the program Resetter iP2770
4. Click the "PLAY", then the printer will proceed, then the iP2770 will print one page with the words "D = 000.0"
5. Click "Clear EEPROM".
6. Then click "EEPROM", and the printer will print the result Resetter iP2770. Writing one row as follows: "TPage (TTL = 00 000)"

1. Turn off the printer by pressing the POWER button.
2. Done ...

Resetter Canon IP2770 / IP 2700 Error 5200

First indications are as follows:
When the iP2770 is turned on, the printer looks normal with GREEN LED flash. But when ordered to do the printing, the 5200 error will appear, and the green LED will blink alternately orange 1x 8x ...

Here's How to Reset Canon IP2770 Error 5200:

1. Turn off the printer power button, but with conditions attached power cord.
2. Press the RESUME button two seconds, then press the POWER button until the green light flash (when pressing the POWER button, release the Resume button jgn first)
3. Then release the RESUME button, but do not release the button POWER.
4. POWER button while still depressed, press the Resume button 5 times. Led will flash alternately orange green with orange flames last. (do not be mistaken because the printer would die 4 times total, but temporary, too)
5. Release both buttons simultaneously.
6. Led will blink briefly then will glow GREEN.
7. And the computer will detect new hardware, ignore it ...
8. Press the POWER button, the printer will die.
9. Press the POWER button again turns on and then the printer will ... iP2770 Printer is ready to use.

Download Software Resetter Canon IP 2700

1. Windows 7, download
2. Windows 7 (x64), download
3. Windows Vista, download
4. Windows Vista (x64), download
5. Windows XP, download
6. Windows XP (x64), download

Related Post

Posted in: Resetter Printers